FUMI Fumi
提交评论数: 2 支持者总数: 18 粉丝数: 0
经常发布的类别汽车（主机）0 4无线局域网路由器（Wi-Fi 路由器）1 0PC显示器/液晶显示器1 0查看更多
2024 年 6 月 18 日 19:41 [1854463-1]。
满意度 4
设计
5
易于设置
5
接收灵敏度
5
功能性
4
尺寸
3
我们可以与同型号产品进行网状连接。
BE805 之间的简易网状连接屏。
[设计。
设计美观。
易于安装。
我只使用网络工具，效果很好。
BE805 是一款非常易于使用的设备。
灵敏度。
在一栋两层楼的房子里，使用 Easy Mesh 从一楼到二楼通过末端房间获得了以下速度。
链路速度： 344 Mbps（2.4GHz） 1728 Mbps（5GHz）
连接速度可能比这更快，但很稳定，看起来像这样。
[功能。
规格允许以最高速度使用 6GHz，但目前在网状网络中无法使用。
我们正在等待固件支持。
此外，如果过了很长一段时间（3-4 天？ 我可以通过在设置中每天重启一次设备来避免这种情况。 我想我只能等待新固件来解决这个问题了。
[尺寸。
我买之前就知道，但它太大了。
[一般评论]。
我买了两台同型号的产品来搭配使用。
我用 AX73 已经有一段时间了，但用这个在 2.4GHz 和 5GHz 上都没有问题。
我也一直在使用 AX73，所以我把它连接到了网状设备上，现在一共有三个网状设备。
我感觉固件还没有完全准备好，但我认为它很有潜力。
如果它能有所改进，我想它一定能获得 5 星好评。
0 人认为此评论有帮助
这条评论有用吗？ 有帮助。
登录后可使用最便宜的通知功能！
无线局域网路由器（Wi-Fi 路由器） > TP-Link > Archer BE805
Mr.
提交评论数: 1 支持总数: 3 粉丝数: 0
经常发布的类别笔记本电脑0 1无线局域网路由器（Wi-Fi 路由器）1 0头套0 1查看更多
2024 年 6 月 13 日 09:00 [1852309-1]。
满意度 1
设计
3
易于设置
3
接收灵敏度
4
功能性
未评级
尺寸
1
别指望有网眼效果。
[设计] [尺寸
盒子很大。 放置难度
[易于设置］
基本上，你可以用 Tether 轻松设置，但有些 wifi 设置可能会出现错误或无法反映。 你唯一需要做的就是用 Tether 进行初始设置，然后再用网页进行维护和其他设置。
接收灵敏度。
正常。 我从未遇到过任何问题。
功能
没有评价，因为只使用了基本功能。
[一般评论］
我买了两台，与 EasyMesh 一起使用。
我本以为可以创造一个美好的家庭 Wifi 环境，但我被出卖了。
由于某些原因，Mesh 只能在 2.4GHz 频率下连接，而且速度慢得要命。
网状网络速度慢是因为它不支持 MLO。
网状网络不支持 6GHz。
每隔几天，卫星就会出现故障并断开连接。
总之，别用它。
3 人认为此评论有帮助
此评论有帮助吗？ 有帮助。
无线局域网路由器 (Wi-Fi 路由器) > TP-Link > Archer BE805
Tobi~san
提交评论数: 68 支持者总数: 1096 粉丝数: 1
经常发布的类别蓝光/DVD 刻录机5 18无线局域网路由器（Wi-Fi 路由器）10 0平板电脑2 7查看更多
2024 年 5 月 20 日 11:42 [1845129-1]。
满意度 2
设计
4
易于设置
4
接收灵敏度
5
功能性
4
尺寸
3
同一制造商的不同型号之间的 EasyMesh 配置无法正常工作
BE805 和 BE550 的对比图片
不知道是个人缺陷还是产品缺陷，它无法正常工作。
遗憾的是，BE805 的基本规格优于 BE550。
固件的完善程度甚至比 BE550 更不成熟，因此同一制造商的不同型号之间的 EasyMesh 配置无法正常工作是没有道理的。
购买 BE805 之前的配置（工作正常）
主路由器：Archer BE550 *EasyMesh
卫星路由器：Archer BE550 *EasyMesh
卫星路由器：RE500X *EasyMesh
接入点：NAS (TS-664) *有线连接至 BE550
接入点：NAS (TS-464) *有线连接至 BE550
购买 BE805 后的配置
主路由器：Archer BE805 *EasyMesh
卫星路由器：Archer BE550 *EasyMesh
卫星路由器：RE500X *EasyMesh
接入点：NAS (TS-664) *有线连接至 BE550
接入点：NAS (TS-464) *有线连接至 BE805
在购买 BE805 后的配置中，出现了 NAS 无法正常访问（如超时）等问题。
BE805 和 BE550 之间的连接采用 2.4GHz 和 5GHz 频段，在 6GHz 频段为 BE550 分配了不同的 SSID。
通过 EasyMesh 的 2.4GHz 连接访问与 BE550 连接的 NAS。
通过与 EasyMesh 的 5 GHz 连接访问与 BE550 连接的 NAS。
通过与 BE805 的 6 GHz 连接访问 BE550 NAS。
通过与 BE805 的有线 LAN 连接访问 BE550 NAS。
通过与 EasyMesh 的 2.4 GHz 连接访问 RE500X 管理屏幕。
通过与 EasyMesh 的 5 GHz 连接访问 RE500X 管理屏幕。
通过与 BE805 的 6 GHz 连接访问 RE500X 管理屏幕
通过与 BE805 的有线 LAN 连接访问 RE500X 管理屏幕。
以下连接类型不会造成问题
通过与 BE550 的 6 GHz 连接访问连接到 BE550 的 NAS
通过与 BE550 的有线 LAN 连接访问 BE805 NAS
通过与 RE500X 的有线 LAN 连接访问 BE550 NAS
通过与 RE500X 的有线 LAN 连接访问 BE805 NAS。
请注意，也许是 TP-Link EasyMesh 的规范，WiFi 路由器（BE805 和 BE550）的卫星路由器甚至无法进入管理屏幕（固件更新由主路由器执行），而中继器（RE505X）的卫星路由器可以使用卫星路由器的 IP 地址进入管理屏幕。 但在 EasyMesh 配置中无法更改某些配置项目（与无线相关）。
6 人认为此内容有用
此评论是否有用？ 有帮助。
无线局域网路由器 (Wi-Fi 路由器) > TP-Link > Archer BE805
Miyahi 先生
评论数: 1 支持总数: 23 粉丝数: 0
经常发布的类别无线局域网路由器（Wi-Fi 路由器）1 8查看更多
重新审核 2024 年 3 月 27 日 21:03 [1826001-2]。
满意度 4
设计
5
易于设置
5
接收灵敏度
5
功能性
4
尺寸
3
总体满意，但使用 Easymesh 需谨慎
该产品推出至今已有一个月，但评论却寥寥无几。
这是我在 Price.com 上的第一篇评论。 我尽量写得简短。
总的来说，我对 Easymesh 感到满意，但考虑购买 Easymesh 的用户需要慎重。
我们以前使用过两台 NEC WX11000T12 进行联网。
[关于我们的使用环境。
最新固件版本为 1.2.0。
使用的是最新的固件版本 1.0.10。
NURO Hikari 2G 合同，通过 2.5GBase-T 连接。
以路由器模式运行，并设置为在 2.4/5/6GHz 频段漫游，使用相同的 SSID。
本产品的功能。
支持 2.4/5/6GHz 频段、Wi-Fi 6E 和 Wi-Fi 7。
支持 Wi-Fi 7 的 320MHz 带宽和 MLO（同时使用多个频段）。
初始设置和 EasyMesh 配置。
通过智能手机应用程序轻松设置。
WAN 和 Wi-Fi 设置以向导形式直观进行。
EasyMesh 设置可能需要一些时间来配对父设备（主机）和卫星设备（卫星机）。 检查卫星的 LED 启动情况尤为重要（只有在启动完成后才能操作）。
使用方法。
与 Wi-Fi 6E 和 Wi-Fi 7 设备高速连接。
Wi-Fi 6E 和 Wi-Fi 7 设备可实现高速连接。
信道设计灵活性高，与 Deco 系列相比非常灵活（对比：Deco BE85）。
担忧。
EasyMesh 目前仅允许在 2.4/5 GHz 频段进行网状配置。
卫星设备无法广播 6GHz 频段、访客和物联网网络。
未来的固件更新将对此进行改进。
27/3/2024 后记。
"这将在未来的固件更新中得到改进。 有关补充。
EasyMesh 的 6 GHz 频段将得到支持，这意味着 Guest 和 IoT 将保留在规范中，只有主路由器会被广播。
23 人认为此内容有帮助（重新审核后：16 人）
通过DeepL.com（免费版）翻译
FUMI Fumi
Number of reviews submitted: 2 Total number of supporters: 18 Number of fans: 0
Frequently Posted CategoriesCars (mainframe)04Wireless LAN routers (Wi-Fi routers)10PC monitors/LCD monitors10See more
Jun 18, 2024 19:41 [1854463-1].
Satisfaction 4
Design
5
Ease of setup
5
Receiving sensitivity
5
Functionality
4
Size
3
You can mesh with the same model!
This is the Easy mesh connection screen between BE805.
Design
It's very cool.
Easy to set up.
I use only the web tool and it works fine.
I use only the web tool and have no problems.
Receiving sensitivity
The following speeds were obtained with Easy Mesh in a two-story house from the first floor to the second floor through the end rooms.
Link speed: 344 Mbps (2.4GHz) 1728 Mbps (5GHz)
The connection can be faster than this, but it is stable.
[Functionality
The specs allow 6GHz to be used at maximum speed, but it is not usable in mesh at the moment.
We are waiting for firmware support.
After a long period of time (3-4 days?), the 2.5GHz speed may be used. I can avoid this by rebooting the device once a day in the settings. I guess I'll have to wait for a new firmware.
Size
I knew this before I bought it, but it is huge.
Overall
I bought two of the same model to mesh.
I have used the AX73 for a while now, but I have not had any problems with it.
I have also been using an AX73, so I have connected it to the mesh as well, for a total of three mesh units.
I have the impression that the firmware is still in its infancy, but I think it has potential.
If it improves, it will definitely be a 5 star product.
0 people found this helpful
Was this review helpful? Helpful.
The cheapest notification feature is available with login!
Wireless LAN Routers (Wi-Fi Routers) > TP-Link > Archer BE805
Mr. Lucky Hazelnut
Number of reviews: 1 Total support: 3 Number of fans: 0
Frequently Posted CategoriesLaptops01Wireless LAN Routers (Wi-Fi Routers)10Headsets01See more
Jun 13, 2024 09:00 [1852309-1].
Satisfaction 1
Design
3
Ease of setup
3
Receiving sensitivity
4
Functionality
Not rated
Size
1
Don't expect mesh.
[Design] [Size
Big box. Level of difficulty in placing it.
Ease of setup.
Basically, it is easy to set up with Tether, but some of the wifi settings may be buggy or may not be reflected. It is recommended to use Tether only for the initial settings, and use the web for maintenance.
Receiving sensitivity
Normal. I have never had a problem.
Functionality
No evaluation as only basic functions are used.
Overall
I purchased two units and am using them with EasyMesh.
I thought I would be able to have a rosy Wifi environment in my home, but I was completely betrayed.
For some reason, the mesh only connects at 2.4GHz, which is slow as hell.
The mesh is slow because it does not support MLO.
The mesh does not support 6GHz.
Satellite is buggy and disconnected every few days.
In short, don't do it.
3 people found this helpful
Was this review helpful? It was helpful.
Wireless LAN router (Wi-Fi router) > TP-Link > Archer BE805
Tobi~san
Number of reviews: 68 Total support: 1096 Number of fans: 1
Frequently Posted CategoriesBlu-ray/DVD Recorder5 items18 itemsWireless LAN Router (Wi-Fi Router)10 items0 itemsTablet PC2 items7 itemsSee more
May 20, 2024 11:42 AM [1845129-1].
Satisfaction 2
Design
4
Ease of setup
4
Receiving sensitivity
5
Functionality
4
Size
3
EasyMesh configuration between models of the same manufacturer does not work properly
Comparison image of BE805 and BE550
It is unclear whether it is a defect of the individual or the product, but it did not work properly.
It is a pity that the basic specifications of the BE805 are superior to those of the BE550.
The firmware is even more immature than BE550's, so it makes no sense that EasyMesh configurations between models from the same manufacturer do not work properly.
Configuration before purchasing BE805 (working properly)
Main router: Archer BE550 *EasyMesh
Satellite router: Archer BE550 *EasyMesh
Satellite router: RE500X *EasyMesh
Access point: NAS (TS-664) *Wired connection to BE550
Access point: NAS (TS-464) *Wired connection to BE550
Configuration after purchasing BE805
Main router: Archer BE805 *EasyMesh
Satellite router: Archer BE550 *EasyMesh
Satellite router: RE500X *EasyMesh
Access point: NAS (TS-664) *Wired connection to BE550
Access point: NAS (TS-464) *wired connection to BE805
In the configuration after purchasing BE805, problems such as NAS access not being able to be done properly (timeout, etc.) occurred.
The connection between BE805 and BE550 was made via 2.4GHz and 5GHz bands, and BE550 was assigned a different SSID for the 6GHz band.
Access to the NAS connected to BE550 via 2.4GHz connection to EasyMesh
Access to NAS connected to BE550 via 5GHz connection to EasyMesh
Access to the BE550 NAS via a 6 GHz connection to the BE805
Access to the BE550 NAS via a wired LAN connection to the BE805
Access to RE500X management screen via 2.4GHz connection to EasyMesh
Access to RE500X management screen via 5GHz connection to EasyMesh
Access to the RE500X administration screen via a 6 GHz connection to the BE805
Access to the RE500X control panel via a wired LAN connection to the BE805
The following connection types do not cause problems
6GHz connection to BE550 to access the NAS connected to BE550
Access to the BE805 NAS via a wired LAN connection to the BE550
Access to the BE550 NAS via a wired LAN connection to the RE500X
Access to the BE805 NAS via a wired LAN connection to the RE500X
Note that, perhaps due to TP-Link's EasyMesh specifications, the satellite routers of the WiFi routers (BE805 and BE550) cannot even access the management screen (firmware updates are performed from the main router), while the satellite router of the repeater (RE505X) can access the management screen by using the satellite router's IP address to access the management screen, but some setting items (wireless-related) cannot be changed in the EasyMesh configuration.
6 people found this helpful
Was this review helpful? It was helpful.
Wireless LAN router (Wi-Fi router) > TP-Link > Archer BE805
Mr. Miyahi
Number of reviews: 1 Total support: 23 Fans: 0
Frequently Posted CategoriesWireless LAN Router (Wi-Fi Router)1See 8 more
Re-reviewed 27 Mar 2024 21:03 [1826001-2].
Satisfaction 4
Design
5
Ease of setup
5
Receiving sensitivity
5
Functionality
4
Size
3
Overall satisfactory, but caution should be exercised with Easymesh
It's been a month since the product was released and there are still very few reviews, so I will contribute.
This is my first review on Price.com. I have tried to keep it as brief as possible.
Overall, I am satisfied with the product, but those considering Easymesh should take note.
We previously used two NEC WX11000T12s to mesh.
We are very satisfied with the product and would like to ask you to be careful if you are considering Easymesh.
We used two NEC WX11000T12s to build EasyMesh with Ethernet backhaul.
The latest firmware version 1.0.10 was used.
NURO Hikari 2G contract, 2.5GBase-T connection.
The router mode was used and roaming in the 2.4/5/6GHz band with the same SSID was set.
Features of this product
Supports 2.4/5/6GHz band, Wi-Fi 6E and Wi-Fi 7.
Supports Wi-Fi 7's 320 MHz bandwidth and MLO (simultaneous use of multiple frequency bands).
Initial setup and EasyMesh configuration
Easy setup via smartphone app.
WAN and Wi-Fi settings are intuitive and wizard-based.
EasyMesh setup may require some time for pairing the parent unit (main unit) and the satellite unit (satellite unit). It is especially important to check the satellite's LEDs to make sure it is up and running (operate it after it is up and running).
Usability
High-speed connection with Wi-Fi 6E and Wi-Fi 7 devices.
High-speed connections are possible with Wi-Fi 6E and Wi-Fi 7 devices, and 1 Gbps is possible within a distance of 5 meters between AP and client.
High flexibility in channel design compared to the Deco series (Deco BE85 in comparison).
Concerns
EasyMesh currently allows mesh configuration only in the 2.4/5GHz band.
6GHz band, guest, and IoT networks are not broadcast by satellite devices.
This will be improved in a future firmware update.
Added 3/27/2024.
"This will be improved in a future firmware update." Addendum regarding.
EasyMesh's 6GHz band will be supported, which means that the Guest and IoT will still be broadcasted by the main router only.
23 people found this helpful (16 after re-review)
Translated with DeepL.com (free version)
2024年3月27日 21:03 [1826001-2]
0 コメント:
コメントを投稿